Routing and Switching Fundamentals Part 1 - CCENT

The Routing and Switching Fundamentals Part 1 training course is available at the Edinburgh, Glasgow, Aberdeen and Inverness Pitman Training Centres or via Online Distance Learning through our Pitman Campus.

Routing and Switching Fundamentals Part 1– CCENT is a highly advantageous course to embark upon if you are looking for a career in IT. You will gain the essential skills of being able to plan, configure, and operate simple WAN and switched LAN networks. Complemented by the ability to successfully install, operate and troubleshoot systems within a small office network.

Course Duration: 50 Hours

CPD Points: 50

Enquire Now!

Course Content

Session 1: Introduction, Computer Networking Concepts, Overview of OSI Model and TCP/IP, TCP/IP Transport and Applications, Modern Ethernet LANs, Ethernet Frame Structure, Conversions.

Session 2: Wide Area Networks, WAN Concepts, Transmission Protocols, WAN Configuration, Connecting to a Network, Topologies, Shared Networking.

Session 3: Communications, IP Addressing, Subnetting, Routers, IP Routing Concepts, Static IP Routing, Dynamic Routing.

Session 4: RIP Protocol, Troubleshooting RIP, Routers and IOS, IOS Access Commands, Basic IOS Commands, IOS Maintenance Commands, ID and Interface Commands, Troubleshooting IP Routing.

Session 5: LAN Devices, Ethernet Switch Configuration, Catalyst Switches, Ethernet Switch, Fundamentals of Wireless LAN, Wireless LAN Security, Wireless LAN Configurations, Network Environment Management, Network Security.

Designed For

The course is designed to give you all the knowledge that you need to go on to become a Cisco Certified Entry Networking Technician.

Objectives

Upon completion of the course, you will receive a Pitman Training Course Completion certificate and you will be fully prepared to take the Cisco ICND1®; exam #640-822 – which will enable you to go on and take the Cisco’s certification path for Routing and Switching.

Testimonials

"Two years ago I was at a crossroads in my career as a Textile CAD designer and decided to expand my IT knowledge in the hope of broadening my job options. Knowing the cost involved I began my research and found plenty of organizations who offe...

IL – IT Technical, ,

|
"After 12 years working for an airline I decided to make a career change and started looking into various training companies. I selected Pitman Training based on their helpfulness and support. I started studying in August of 2007 and initially...

MM – IT Technical, ,

|
"I have completed a number of with Pitman Training since 2007, including ECDL course and the MCSA. I have always found the staff at the training centre to be very helpful, friendly and supportive, in particular John whose help, advice and tech...

SH – IT Assistant, ,

|

Routing and Switching Fundamentals Part 1 – CCENT

Course Content

Designed For

Objectives

Testimonials

Prerequisites

Funding

Enquire Now

For more information on this or any of our courses complete the form

Register for a course